Best Sound Absorbing Fabrics

You may have heard the term “sound absorption” as well as “soundproofing” before and pretty much assumed that they meant the same thing. However, these are, in fact, different strategies for combating unwanted noise.

Certain materials can be very effective and efficient when you’re looking for the best sound absorbing fabrics. Any sort of cloth or porous material, for instance, will usually convert sound energy into heat. One way to truly understand this is to think about how sound causes air to move. While sound is typically thought of as a pressure wave, there is also air motion associated with the sound. The regions of high and low pressure are caused by sound flowing into and out of different regions, clumping up in some areas and thinning out in others. The equation a scientist would utilize here to quantify this relationship makes use of specific acoustic impedance, which gives a relationship between pressure and air flow, and the strength of that connection depends on air density and sound speed. Naturally, any porous material that restricts the flow of air is going to prohibit that motion, and thus minimize the energy in the sound wave.

Sounds do not last forever. In an open environment (like the outdoors) a sound will disperse over a growing area from its starting point, the energy spreading out, causing the sound to get quieter and quieter until it eventually dies away. Similarly, in an enclosed room the sound will also spread, but only until it completely fills the room. In both of these cases, though, there is an effect beyond the distributing of acoustic energy that causes sound to grow quieter: acoustic absorption. Acoustic absorption pretty much describes any process that causes sound energy to be dissipated, and intelligent use of acoustic absorption is how we keep concert halls from turning into echo chambers or ensure that speech in offices and classrooms is clear and distinct. The success of every sound absorbing project is heavily dependent on the fabrics you make use of.

Best 15 Sound Absorbing Fabrics

So, before we go any further here are 15 of the best sound absorbing fabrics which we have found can have a big impact on almost any soundproofing project:

1. Foamily 12 Pack- Acoustic Panels Studio Foam Wedges

Foamily 12 Pack- Acoustic Panels Studio Foam Wedges

This fabric is great for spot treating sound on walls in your studio or office. For using in recording studios, control rooms, offices home studios, home entertainment theaters as well as home offices. Each WEDGE comes uncompressed and in perfect condition. The Wedges in the photo will be exactly what you get and 12 Pack covers 12 square feet. Each tile is 1 square foot of 1 inch thick acoustic wedge and can be utilized for professional acoustic control, sound dampening, acoustic treatment, noise reduction, reduce waves, reverb and flutter echoes in smaller to medium sized rooms. These are seemingly decent panels and they are designed superbly. They won't have a correct standing bass (you'll require bass traps for that) but for high frequency reflections, they get the job done effectively.

PROS


  • Easy to install.
  • Highly effective.
  • Very cost-effective.

CONS


  • Require bass traps.

2. Mybecca 12 Pack- Acoustic Panels Studio Foam Wedges

Mybecca 12 Pack- Acoustic Panels Studio Foam Wedges

Acoustic foam panels feature a classic design that provides exceptional sound deadening and echoes absorption. An affordable selection for sound absorbing a room of any size. Wedges, convoluted, Bevel and / or Hexegan, acoustic foam panels are effortless to shape and cut to size. At the same time, they supply a level of rigidity and consistent firmness that provides long-term durability, even in busy recording studios. Whether you’re on a bus or just or just live on a busy street, these sounds enter our living space and work through the ways everyone knows, such as windows, doors, floors, walls and ceilings. To minimize the volume, you should create an obstacle to it or moderate it. Well, the news is that many new apartments are progressive to prevent sound penetration. But your apartment might not be older and have facilities like new ones. There are two prime ways to create a quiet environment and sound therapy: Adding levels that the sound or its echoes are attracted to before our waves reach their ears or creating a barrier to voice input.

PROS


  • Sound proofing is incredible.
  • Panels provide long-term durability.

CONS


  • May not fully cut down on noise.

3. Noico 80 Mil 36 Sqft Car Sound Deadening Mat

Noico 80 Mil 36 Sqft Car Sound Deadening Mat

The best price for 80 mil automotive butyl and foil sound deadening on Amazon Noico 80 mil is only $ 1.77 per 1 sqft! You are not just purchasing an excellent quality product but also saving more than 20 % comparing to Gtmat, Boom Mat and Extreme. It’s generally a more cost-effective solution than other brands so you wouldn’t want to miss a chance of getting an extra 50 % of the quality and efficiency for just 25 % of the price. Now the material is 1, 5 times thicker that will get you 1, 5 times more effective and efficient insulation. Noico 80 mil is 1, 5 times better in comparison to sound deadening material of 50 mil and just 25 % more expensive.

Automotive self-adhesive insulation contains butyl. Noico sound deadening has a weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be potentially gained from 80 mil thickness material. Audio insulation Noico has a special indicator as to if it is installed properly. The special embossing on the foil must be rolled out with a roller until it is absolutely smooth, then you'll be 100% sure that the insulation is set correctly and professionally. The sound dampening material comes in handy size sheets which make it uncomplicated in terms of the cutting and installation process. The sound deadening material specifications: Nominal thickness of 80 mil; total coverage area of 36 sq.feet; total number of sheets in the stack 9 (sheets are folded); Nominal sheet size 29, 5×19, 5 inch and roller is not included.

PROS


  • Minimizes rattle, vibrations and low frequency noises.
  • Easy to use/ apply.
  • Relatively inexpensive.

CONS


  • Has a rubber smell, but the foil can still block it.
  • The foil is fairly thin.
  • You must wear protection gloves when installing it.

4. Dynamat 10455 Thick Self-Adhesive Sound Deadener

Dynamat 10455 Thick Self-Adhesive Sound Deadener

Dynamat is the most popular brand among auto enthusiasts because to their quality and range of products. They are specifically manufactured in a way that dampens the noise and vibrations in a car. Due to their wide range of products they can generally fit within any budget. They are known to rule the car audio and automotive acoustic solutions market due to their quality. Due to being an industry standard, many professionals will be able to properly fit it for you. It is the top fighting engine rumble, speaker rattle, and road noise and buzzing vehicle parts!

You can apply Dynamat Xtreme to your vehicles resonant surfaces and enjoy enhanced clarity, loudness and bass response from your car stereo. High-performance Dynamat Xtreme is much lighter than Dynamat Original, four times more effective, requires no heat to apply and is recommended for vehicle tops, sides and contoured areas. Dynamat Xtreme is covered in aluminum for high temperature areas such as firewalls and floors. The kit contains nine 18" x 32" pieces of Dynamat Xtreme for rear decks, doors, floors and trunk floors. Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels and under-hood installations.

PROS


  • Fairly easy to install.
  • Great sound, vibration, and heat deadening material.
  • Significantly reduces road noise.

CONS


  • Fairly easy to install.
  • Great sound, vibration, and heat deadening material.
  • Significantly reduces road noise.

5. BXI Sound Absorber - Acoustic Absorption Panel - Polyester Fiber

BXI Sound Absorber - Acoustic Absorption Panel - Polyester Fiber

It has an exceptional performance in absorbing sound energy. Average absorption coefficient is 0.78. NRC: 0.87. Provides reverberation time adjustment and noise reduction. This product is great for recording studios, home theater as well as the office. It has an easy installation process due to its general purpose spray adhesive and double sided tape work. These panels are cut by workers, so some of them might not be perfectly rectangular or 16’’ x 12’’ (2% tolerance). If these “imperfect” panels do trouble you when installing them, you will definitely get a satisfactory solution. Size: 16'' X 12'' X 3/8'', light weight, and has multiple colors for decoration. BXI Acoustic Panel, made up of high density polyester fiber, is an ideal broadband sound absorber for rooms like recording studio, home theater, offices, etc. It is designed to trap reverb, eliminate echo, and decrease noise. In addition, it includes lifetime technical support to ensure your satisfaction. Great quality, great service, and a great price.

PROS


  • Quality of material is great.
  • Adequately small and thick.

CONS


  • Dampen sound effectively, but may not absorb noise that much.

6. RHINO Acoustic Absorption Panel

RHINO Acoustic Absorption Panel

This product has easy installation and can be installed by anyone. You can simply attach 3M Double Sided Tape (sold separately) to the back of each panel and adhere in the desired position. When moving or rearranging the room you can simply detach each panel and reinstall to the new desired location with absolutely no holes in your walls. It contains a B1 Class Flame Retardant, its odorless, and do not alter air quality making it safe for adults, kids, and pets! Effective: .95 NRC (Noise Reduction Coefficient) rated - commercial grade results packaged for home or office use.

The density is about 230kg/m3 and densest on the market providing maximum sound, echo, and reverb absorption. Each package provides the ability to cover up to six square feet of area and it’s made of 100% Polyester Fiber. The item in itself is a neat design with fairly light material, a beautiful marble effect neatly designed as tiles that be placed sideways and accomplish a beautiful pattern that is both neutral and elegant to many offices and homes.

PROS


  • Very lightweight.
  • High density.
  • Eco-friendly.

CONS


  • No cons.

7. Guilford of Maine Sona Acoustical Fabric

Guilford of Maine Sona Acoustical Fabric

Guilford manufactures an acoustically transparent cloth from 14.4-ounce polyester and is available in 12 colors, while also being fire rated. The weave and 255 thread count per inch allows for the sound and air to come through but also mask the material it covers. The fabric is utilized for speaker grills and works effectively on diffusers, bass traps, and acoustic panels. It can also be utilized for curtain material.

The acoustically transparent fabric is non-reflective, therefore all sound passes through. The 60-inch wide cloth is sold by the yard, meaning it covers more than a 44-inch fabric. For wrapping 2’x4’ insulation for bass traps, absorbing panels, and diffusers, one yard of fabric will be enough.

An ATS Acoustics exclusive, this special line of Guilford of Maine fabric provides superior sound absorption at an affordable price. Guilford of Maine makes popular, high-quality fabrics used on acoustical panels in thousands of buildings all around the world. The texture and colors gives off a certain quality and professional look to your acoustical projects. It is polyester, and meets ASTM E84 Class I or A standards.

The weave on this fabric is open enough to allow sound to pass through and be absorbed, and tight enough to mask the appearance of the background behind it. This fabric is shipped unfolded on a roll. Quantity 1 is about 1 yard, 36x60 inches. If you order a quantity greater than 1, they will ship one piece which is 60 inches wide and as many yards long as the quantity you order (up to 50 yards).

PROS


  • Excellent quality.
  • Available in a variety of colors.
  • Works fairly effectively.

CONS


  • Relatively expensive.

8. Acoustic Foam

Acoustic Foam

Acoustic foam is one of the most commonly utilized materials due to its easy installation and its affordability as well as its effective absorption of a sound. Typically, the foam contains an attractive fabric and design with different patterns, which contributes to the aesthetics of your home. However, it is not of great help if used in large spaces since it is best to install it in small and middle-sized ones, like rooms or offices.

Specifically, there are a few acoustic foam panel forms, such as the convoluted acoustic foam panel. It has an egg crate design so it is perfect for a recording studio, for instance. It is both aesthetic and successful at decreasing sounds. The Aluminum-facing panel is specially made for high-heat spaces and environments, since it is sturdy and provides protection from heat. Fabric-covered foam panels enable acoustical performance everywhere, even in theaters and auditoriums, because it is effortless to install and maintain its fabric.

PROS


  • More aesthetically pleasing.
  • Has sufficient thickness.
  • Great sound absorbing capabilities.

CONS


  • Does wok not well with great surfaces.

9. FloorMuffler Flooring Underlayment Acoustical and Moisture Barrier

FloorMuffler Flooring Underlayment Acoustical and Moisture Barrier

This product is the highest rated and most effective acoustic barrier on the market as well as the most effective underlayment for minimizing foot fall noise. It is the perfect choice for most laminate, engineered and solid hardwood flooring applications. It is light, strong and flexible, making it uncomplicated to handle and install in nearly all conditions. It is mold and mildew resistant, dramatically reduces foot traffic noise and no additional film required. This material is suitable for use over concrete and wood sub-floors. With state of the art technology that produces the lightest weight, high performance product. It is mold and mildew resistant as well as non-allergenic. This material can be used for commercial and residential installations. Sound Absorbing Underlayment materials can be foam, vinyl, and rubber. They are dense and they can supply sound absorption but also soundproofing.

PROS


  • Fairly dense.
  • Light, strong and flexible.
  • Mold and mildew resistant.

CONS


  • Sound dampening was average and vapor barrier properties may fairly minimal.

10. ATS Acoustical Cotton Batts

ATS Acoustical Cotton Batts

This material has excellent sound absorption - Better than Owens Corning 703. No Itch or Skin Irritation and resists Microbial Growth. Acoustical Cotton Batts can be used as an eco-friendly alternative to fiberglass or mineral wool acoustic insulation. The natural cotton fibers are 100% recyclable and are manufactured from at least 85% post-industrial recycled content, making them perfect for LEED certified projects. ATS Acoustics does not recommend this fabric for use in applications requiring a fire rating. Acoustic cotton batts are made of natural cotton fibers which makes it extremely soft and with a less chance for germ infection.  Also, it might be made of a high percentage of recycled cotton.

The fact about its hygienic benefit is essential for people with children since the material is friendly to the human skin. Further, it is resistant to fungi, mold, and even also to flames. Therefore, it might be considered to be one of the best sound absorbers and the most effective and affordable ones. It is effortless to install it whether in offices, homes, auditoriums, theatres, or wherever you require sound absorption.

PROS


  • Excellent sound absorbtion.
  • Eco-friendly.
  • Extremely soft and affordable.

CONS


  • No cons.

11. Stand Up Desk Store ReFocus Acoustic Room Dividers

Stand Up Desk Store ReFocus Acoustic Room Dividers

These premium quality room dividers absorb 85 percent of the sound that passes through them, helping achieving a quieter workspace. These office partitions can be utilized individually or zipped together. You can also buy add on panels to cover larger areas. PET core is composed of 60 percent post consumer material while the outer fabric is designed of 100 percent post consumer material.

The zippered connections of these wall dividers can flex, enabling you to wrap the panels around a cluster of desks, or create a quiet meeting nook. ReFocus Acoustic Room Dividers | Office Partitions minimize ambient noise and improve privacy in today’s dynamic open office environments. As beautiful to look at as they are effortless to configure, ReFocus frees you from distractions to enhance productivity. Whether you’re dividing two desks or an entire office, this product are up to the task.

Start with the basic three packs and broaden the system by zipping together the add-on panels. Best of all, the panel connections between these office partitions are flexible, enabling you to wrap around a cluster of desks or create a secluded nook for private discussions. ReFocus wall dividers provide a Noise Reduction Coefficient (NRC) of 0.85. In non audio geek speak, this just means that 85% of the sound that passes through the material is absorbed. The end result is a pleasant and quiet workspace.

PROS


  • Absorb 85% of sound.
  • Can be used individually or zipped together.
  • Beautiful appearance.

CONS


  • Pricier.

12. ATS Acoustic Panel

ATS Acoustic Panel

This product provides clearer, more enjoyable sound by effectively controlling unwanted reverb and echo. It has a beautiful visual appeal for refined spaces. Provides effective sound absorption and has a NRC 0.8 out of 1. It is built to last with a solid wood internal frame that protects edges and corners from dents and damage. Features a furniture-quality design and workmanship and handcrafted in the USA. ATS Acoustic panels supply the simple yet important function of absorbing sound.

You can think of them like acoustical black holes - sound goes in and doesn't come back out, moreover, this panel is 24x24x2 inches. The cover fabric is made of beautiful polyester microsuede. Wall-mounting hardware and instructions are also included. All the acoustic panels are rated with an NRC (Noise Reduction Coefficient) between 0 and 1. This rating suggests how much of the sound the strikes of the panel are absorbed. ATS Acoustic Panels with Microsuede Fabric in 2-inch thickness are rated 0.8 out of 1.

In a recording studio or mixing room, ATS Acoustic Panels minimize reflections from the room's hard surfaces. This keeps the sound clear, as well as free from excessive reverb. This is especially crucial when recording speech or vocals. Acoustic panels in your home theater will make sure you and your audience will fully experience the great sound your system is capable of. Many houses of worship and other auditoriums across the country have resolved their sound problems on a very reasonable budget by installing ATS Acoustic Panels.

PROS


  • High quality design.
  • Reduces reflections from the room’s hard surfaces.
  • Provides effective sound absorption.

CONS


  • Color may fade overtime.

13. Roxul Rockboard 60

Roxul Rockboard 60

Available to support several of interior applications, including insulating mechanical or utility rooms, adding also a barrier to noise and fire. Rockboard 60 in particular has been utilized for sound studios and theaters, as it has excellent sound absorbing characteristics and is effective at decreasing sound transmission across a wide range of frequencies. This is a case of 6 pieces of 24 x 48 x 2 inch Rockboard 60 manufactured by Roxul.

It is firm mineral wool board with a density of 6 pounds per cubic foot. Rockboard 60 is a great selection for acoustic projects that require a rigid material. It’s also utilized in some bass trap designs. Be aware that this product can cause respiratory, skin and eye irritation so avoid breathing fiberglass dust and contact with eyes or skin. Make use of a NIOSH- certified disposable or reusable dust respirator (certified N95 or higher). When applying this material, wear long-sleeved, loose fitting clothing, gloves and eye protection. It has a 6 pound per cubic foot density. This material is also popular for bass traps and other acoustical products.

PROS


  • Excellent sound absorbing characteristics.
  • Effective at decreasing transmissions.

CONS


  • No cons.

14. Frost King CF1 "No Itch" Natural Cotton Multi-Purpose Insulation

Frost King CF1 "No Itch" Natural Cotton Multi-Purpose Insulation

This product has no itch insulation and is made from 100% recycled denim. This multipurpose insulation is natural and entirely nonirritating. Effective uses include insulation, cushioning, and also noise dampening. This effortless-to-use insulation can be cut or torn to fit pipes and ducts, walls in between joists, etc. it is mold-resistant, mildew-resistant, fire-resistant. No warning or precautions necessary; can be handled/installed with no requirements for gloves, goggles, masks, that is because it is 100% recyclable. It is 16" W. x 1" thick x 48" L. - Size: 16 In. x 48 In. Utilize for insulating, cushioning, and noise dampening. Cut or rip to fit pipes and ducts, walls, and many more.

PROS


  • The tape can be cut into short pieces and places onto difficult areas.

CONS


  • The tape must be wrapped at an angle with an overlap.

15. BA Series 9 | Best for Sound Proof, Sound Deadening, Acoustic Treatment

BA Series 9

This product comes with a density of 200kg/m3. This soundproofing beast performs 2 - 5x better than “in-the-market products" such as - Acoustic Foam, Foam Panels, Acoustic Panels, Wall Panels, Insulation Foam, Sound proof Padding and Mass Loaded Vinyl. These panels pack a punch for your sound proof requirements, you just have to follow the guidelines in the Product Description and feel the difference. These panels are packed with High NRC Rating and are great for eliminating bad interior acoustics like echoes and reverbs!

These panels are 100% safe, so no more Melamine Foam indoors, and are manufactured in clean rooms with 100% fibers, with no chemicals added, not even fire retardant agents when award Class B1 Fire Retardant. Sound proof & acoustic treatment is complex that’s why their team has a less than 24 hours answer back policy. Not quite confident yet? You can easily purchase a box and just return if you are not satisfied and get your money back.

PROS


  • Very easy to install.
  • Looks great on walls, ceiling, doors, etc.

CONS


  • Relatively expensive

Buyers Guide

How Does Sound Absorption Work?

Sound absorbers are utilized at the source of a sound (such as a diesel engine) and at its receiver (such as an equipment cab). They’re made of open cell acoustic foams that may contain specialized facings. The open cells in acoustic foams enable the passage of sound energy. This energy is converted into small amounts of low-grade heat and dissipated effortlessly.

The facings for sound absorbing foams can tune-out specific frequencies, such as the low-frequency rumble of the diesel engines utilized in farm or forestry equipment. The sound absorber’s facing material can also supply a durable, cleanable finish. That’s essential for noise control applications where, unlike a home theater system, there’s exposure to industrial fluids and environmental contaminants.

How are Sound Absorbers Made and Installed?

Acoustic foam comes in sheets or rolls in a variety of lengths, widths, and thicknesses. Elasto Proxy, a custom fabricator of acoustic insulation, uses water jet equipment to cut sound absorbing foams to size without the use of knives or dies – tooling that adds costs to projects. First, however, we can laminate different sound absorbing materials together to make an insulation “sandwich” with particular properties.

For instance, Elasto Proxy can laminate a vinyl facing to polyurethane foam. Then, on the other side, we can apply a pressure-sensitive adhesive (PSA) with a removable liner to provide assistance for ease-of-installation. This composite material puts the facing on top, the liner on the bottom, while the foam is in the middle. Importantly, this sound absorber stops low-frequency sounds and is uncomplicated to install and clean.

Elasto Proxy also tries to add value to sound absorbers through parts marking, kitting, and custom packaging. With their inkjet printing and UV drying equipment, they can mark your parts so that they’re fairly simple to identify. They also provide you with kits that are specially-packaged to consist all of the acoustic insulation that you require for a build. Instead of waiting for multiple shipments or searching shelves for parts, you can simply open a box and get to work.

What is the Best Sound Absorbing Material for Your Application?

Every industrial noise control application is fairly different, but this list of questions is a good place to start:

  • What is the highest insulation thickness that your application can support?
  • Are you trying to insulate an area where there’s heavy air flow resistance, or can air flow in and out?
  • Do you require facing materials that can absorb a specific frequency or frequencies?
  • Do you require facing materials for protection? If so, what exactly are you protecting against?
  • If the sound absorber must supply flame resistance, what is the flame rating you need to meet?
  • Will the acoustic insulation remain stationary, or be liable to opening, closing, and bending?
  • Will you add sound absorbing materials to structural elements where there’s vibration?

Characteristics of Sound Absorbing Materials

When it comes to sound absorbing materials, also called sound absorbers or sound diffusers, they are, generally, soft, light, fluffy, or porous, which allows them to better absorb an echo.

While products made of sound absorbing material can soften up the surfaces of the room, they are also designed to help with the aesthetics of the room.

However, their prime function is to enhance the quality of a sound within the room.

Furthermore, you should be aware of the fact that a sound absorbing ability of a material is not always the same depending on frequency of a sound.

So, low frequencies, below 500Hz, can be much more difficult to detect and absorb while higher frequencies are, typically, easier to absorb.

Before moving on to the materials themselves, you should know that they are divided into three primary categories.

Porous Absorbers

They are made of a porous material. However, they can be divided into two forms: fibrous material and open-celled foam.

Fibrous material can absorb a sound since a sound wave is able to infiltrate into its surface where it gets bended and dampened and then converted into heat energy.

This means that their prime function is to convert the acoustic energy into heat energy where most of the sound is absorbed into heat and only small parts of it are reflected back to the room.

On the other hand, open-celled foam absorbs a sound by the air movement of the sound waves through passages of the material and as a result, the sound is decreased and the heat is generated.

Porous absorbers are widely utilized because they are effective and successful in minimizing a sound especially in mid-range frequencies. Also, the thicker the material the greater impact it can have on sound absorption.

Panel Absorbers

They are made of non-porous and non-rigid materials.

Also called membrane absorbers or single absorbers, they present a group of typical building elements, such as a table, a chair, a window, a door, etc.

Their prime function is dealing with low or bass frequencies of a sound where their best effectiveness of absorbing a sound can be obtained.

Resonance Absorbers

They consist of a mechanical or acoustical oscillation system where they have plates with an air space. Those plates can be either of perforated materials or with holes or openings.

The holes or openings are able to trap and lock the sound inside, so the echo is successfully absorbed and minimized.

These absorbers exhibit one of the most effective ones when it comes to low frequencies.

Rather than reflecting noise, sound waves are absorbed into this particular type of material, softening echo and reverberation to enhance the sound in a room.

One useful material is fabrics, utilized for heavy acoustic curtains and blankets. The most popular though is acoustic foam, a special material designed with special cell structure and density to deflect, dampen, and absorb unwanted sounds. They are typically used in studios, theaters, and entertainment centers.

Household Items for Sound Absorbers

Now let’s look at a few household items that can act as sound absorbers:

Soft Furniture: Sofas and Cushions

First and foremost, let’s talk about the results you can get simply by selecting the correct pieces of furniture. Depending on the problem you’re trying to solve, a strategically placed sofa can really influence the noise levels in a room. Best of all, you’d be able to achieve decent results by making use of  the things you already own — which is why this is also the cheapest sound absorbing method you can try.

Thick, Fluffy Carpets

While sofas and furniture are obstacles the sound hits while traveling through the room, you’ll also require materials you can use on your walls, floors, and even ceilings. Believe it or not, you can make use of carpets for all of those surfaces — but first, let’s start with the basics.

Of course, having thick carpets on the floor can significantly decrease the amount of noise our footsteps make. If you have downstairs neighbors, laying down a carpet would lessen the vibrations you’re passing down to them. Furthermore, wall-to-wall carpeting would also get the job done. Especially for office spaces where everyone’s shoes are making clicking and tapping sounds.

But really, if you don’t own a thick carpet, you can always get a memory foam carpet underlay. It’s basically a half-inch thick cloud you can easily slide under your carpet — and an all-around fantastic investment if you ask me.

Paintings or Tapestries

If you want to get rid of reverberations, you will have to take as many hard surfaces as you can out of the equation. If you have completely bare walls, sound waves will easily bounce off and therefore become louder. That’s where tapestries and canvas paintings will play a role.

You can simply make use of anything that can cover the vast open space on your walls. Obviously, you probably won’t find a painting that’s huge enough to cover your whole wall. But really, as long as you find one that can cover a large section in the middle of your wall, you’d be able to hear a big difference.

However, tapestries may be an even better solution. After all, they generally come in large dimensions that are upwards of 90 by 90 inches. Again, it would be perfect if the tapestry you end up going for could add some weight to your walls so that it may also act as a soundproof barrier. But really, you can also just attach other soundproof items to your wall and cover them with a tapestry for aesthetic and absorbing purposes.

Sound Absorbing Egg Cartons

Out of the many soundproof myths is the fact that people think that makin​​g use of egg cartons is a good soundproofing method. Even though egg cartons can’t block noises from entering or exiting your room, they might be able to stop sounds from echoing.

After all, egg cartons are typically made of paper fibers, which are famously great at sound absorption. So could this soundproofing myth be hiding just a grain of truth? Well, why not? If a thin cotton tapestry can assist you in softening your walls, so can egg cartons.

Now, the one thing to note here is that the crates may not won’t do much on their own — just like the tapestry. Instead, you’ll want to fill the crates or integrate them with more effective techniques. Still, it’s definitely not the most attractive solution, so you can either try another one or conceal the egg crates once you have them on your walls.

Regular Curtains and Blankets

In addition to my furniture tip, this is another one that I like recommending to people who ask me for cheap solutions. If you happen to have old blankets and curtains lying around, you can use those on your walls, windows, doors, and even ceilings.

As you can imagine, the thicker the blanket or curtain, the better. So you really won’t get great results if you break out your mother’s old flimsy curtains. Still, if you get ones that are a bit more substantial, they should soften up the surfaces that would otherwise cause sound waves to bounce. In fact, if you’re wondering how you would use blankets around your home, I’ve written a guide that can be used both for regular and soundproof ones.

Thick Room Divider Curtains

As great as soundproof curtains are, most of them have a pretty major flaw. They’re mostly made of materials that are differently colored on the front and the back. In fact, some soundproof curtains have completely different materials on the front and the back. They typically utilize triple weave technology — so there are three layers of fabric there — but the back layer is a different color from the front one.

Well, that’s a problem soundp​​roof room divider curtains aim to solve. Since regular soundproof curtains are designed to go on your windows, there’s no need for them to be symmetrical. After all, only one side would be facing the room. And who cares what the people outside see when they look in — they shouldn’t be snooping anyway.

On the other hand, room divider curtains were made to hang in the middle of the room. In that case, you really want both sides of the material to match. As far as I can tell, room divider curtains are actually only two layers of fabric sewn together back to back. So that’s why the same color is on both sides.

In some of my previous guides, I also suggested that you open up your room dividers and attach MLV inside. That would definitely up their soundproofing capabilities.

Sound Blankets (Moving Blankets)

Of course, sound blankets are probably the most effective of these kinds of fabric soundproofing tools. These heavy and thick blankets were originally made for moving furniture from one place to the other. After all, they provide just enough padding to soften the blow of any collisions, and they’re dense enough to withstand the weight.

Now, we’ve come a long way since these types of products were used exclusively for moving heavy furniture. However, even when only moving blankets were available for purchase, musicians and audiophiles of all kinds were also using them to line their walls. So, manufacturers were quick to figure out that a majority of their customers were using their products for soundproofing. Once they understood that, they rebranded their products as soundproof blankets.

Regular Curtains and Blankets

If you happen to have old blankets and curtains lying around, you can make use of those on your walls, windows, doors, and even ceilings.

And of course, the thicker the blanket or curtain, the better. So you really won’t get the best results if you break out your mother’s old flimsy curtains. Still, if you get ones that are a bit more durable, they should soften up the surfaces that would otherwise cause sound waves to bounce.

What to Consider When Choosing Sound Absorption Materials

There are many of the best sound absorbing fabrics, and they are all beneficial and versatile. So, how do you know which one to select? Consider the following factors to assist you in narrowing down your options:

  • Where You Are Soundproofing: The first thing you need to consider is where you plan on soundproofing. For instance, do you want to soundproof in the bedroom? If so, you may select acoustic panels in a soothing color. Or do you want to soundproof a workout area where sweat and moisture can fly? You may be better off with a water-resistant panel.
  • What Are You Trying to Soundproof: Next – what are you trying to soundproof? If you wish to soundproof an air conditioner, then you want to purchase a material you can customize to fit into the unit. If you want to soundproof an entire room, and then select a material you can install on the walls that meet your sound-absorbing needs and your budget.
  • What Are Your Needs: Do you wish to absorb sound or reflect it? Different products are designed to provide different solutions, so it’s essential to talk to an expert and figure out your exact soundproofing needs.
  • What Look Do You Want: Do you want a natural, environmentally-friendly look in your garage or workroom? You can opt for a recycled material. Do you want custom art in addition to sound absorption?

Final Recommendation


Our favorite selection was the Acoustic Foam because it is effortless to install, affordable and absorb sounds effectively, while contributing to the aesthetic of your home.

Final Word

Taking all of these materials into consideration, I believe you can manage to find the best sound absorbing fabric to fit your needs. You should pay attention to the characteristics and usage of each material, and in no time you will be free of that bothersome noise and have a clear and audible home.

I hope you have found the answer to your problem among these many examples of sound absorbing materials. If not, at least you know what to expect from these treatments, as well as how they work. Today’s acoustic market is rich with options, and I am certain you will find something which will meet your wants and needs.


Leave a Comment